NEW! The new eight wavelength Optrode is perfect for all of your color endpoint titrations! You no longer have to change sensors when you change color indicators.
|
6.1115.000 |
|
NEW! Polymer Membrane Ca2+ Ion Selective Electrode
Metrohm's newest Ion Selective Electrode is the space saving combination Ca2+ ion selective electrode that is suitable for both direct measurements and titrations. This electrode is housed in a rugged polymer body with membrane that is specially designed to resist physical and chemical damage. This space saving combined sensor also features an reference system utilizing chloride-free electrolyte that is suitable for use when chloride readings are also needed.
|
6.0510.100 |
NEW! Glass Bodied Thermoprobe for Thermometric Titrations
The new glass bodied Thermoprobe is designed to run in nearly any matrix and is as close to a universal sensor as can be made! This sensor will have extremely long life in polar, non-polor, highly acidic and highly basic solvents and reagents! Follow this link to learn more about thermometric titration! |
6.9011.020 |
scION Ca2+ Thick Film Ion Selective Electrode
Metrohm's cutting edge solid state ISE on a chip specifically developed for titrating calcium/magnesium hardness. The scION quickly equilibrates, can never clog and can be stored dry! The exclusive thick-film technology used for the scION electrode allows for easy and affordable replacement of the ISE tip when required. Requires scION shaft 6.1241.070 and separate reference electrode 6.0750.100. Also available in an affordable 3-pack part number 6.0509.007. |
6.0509.000 |
Solvotrode easyClean
The next generation of the famous Metrohm Solvotrode! This combination electrode is perfect for titration of all of your non-aqueous samples and features the new Metrohm easyClean diaphragm. The easyClean diaphragm allows the reference and measurement bulb to be cleaned without being touched allowing for quicker and more accurate measurements. |
6.0229.010 |
Ecotrode Gel with NTC Temperature Sensor (plug in head U)
MAINTENANCE FREE, low cost combination pH glass electrode for measurement of pH and titration of routine samples. Uses new unique indicating KCl gel as reference that lets you know when the electrode is expired. Integrated NTC temperature measurement. Uses new Metrohm plug U for electrodes with integrated temperature sensors. |
6.0221.600 |
Ecotrode Gel
MAINTENANCE FREE, low cost combination pH glass electrode for measurement of pH and titration of routine samples. Uses new unique indicating KCl gel as reference that lets you know when the electrode is expired. Uses new Metrohm plug U. |
6.0221.100 |
iUnitrode
Intelligent high performance pH electrode with integrated temperature sensor. For measurements and titrations in difficult sample matrices, elevated temperatures and hard to discern endpoints. Requires iConnect cable 2.854.0010 and compatible titrator or measuring module. Stores serial number, calibration data and calibration history on electrode. |
6.0278.300 |
Unitrode with PT1000 (plug in head U)
High performance pH electrode with integrated temperature sensor with head U for separate electrode cable. For measurements and titrations in difficult sample matrices, elevated temperatures and hard to discern endpoints. Uses new Metrohm plug U for electrodes with integrated temperature sensors. Requires either cable 6.2104.600 or 6.2104.610. |
6.0258.600 |
Spearhead pH Electrode
MAINTENANCE FREE Combination pH glass electrode for measurement of pH in semisolid samples such as cheese and fruit. Uses new unique indicating KCl gel as reference that lets you know when the electrode is expired. |
6.0226.100 |
PT1000 Temperature Sensor Stainless Steel Probe
Specialty stainless steel bodied PT1000 temperature sensor for use with Spearhead pH electrode. For temperature measurement in semisolid and liquid matrices. Integrated cable with 2mm B plugs for Titrando, 780, 781, 826 and 827. |
6.1114.010 |
Aquatrode Plus with PT1000
Combination pH glass electrode with integrated temperature sensor for measurement and titrations in poorly conducting, low ion concentration and poorly buffered matrices. Attached electrode cable for all Metrohm titrators and meters. |
6.0257.000 |
5-Ring Conductivity Measuring Cell, c = 1.0 cm-1 with integrated PT1000 (Plug N)
Intelligent conductivity measuring cell with PT1000 temperature sensor for 856 conductivity module. Exclusive Metrohm 5-ring measuring technology to eliminate signal noise and drift. c = 1.0 cm-1. |
6.0915.130 |
Ionic surfactant electrode
Ion selective electrode (ISE) for the titration of cationic and anionic surfactants in aqueous matrices. Requires separate reference electrode 6.0750.100. |
6.0507.120 |
iAg Titrode
Intelligent maintenance free silver ring electrode for precipitation titrations with no change in pH value and neutral to acidic titration conditions. Requires iConnect cable 2.854.0010 and compatible titrator or measuring module. Stores serial number, calibration data and calibration history on electrode. |
6.0470.300 |
Thermoprobe
Temperature sensor for thermometric titration with 859 Titrotherm |
6.9011.020 |
| Featured Cables |
iConnect
Intelligent connection for iTrodes to iConnect equipped Metrohm titrators and measurement modules. High performance measuring interface connects directly to electrode. Full compliance and traceability according to 21 CFR part 11. |
2.854.0010 |
Electrode cable with plug in head U - 1m
Connection cable for new Metrohm electrodes with integrated temperature sensors! Now there is less waste when replacing any Metrohm electrode with the new U connection. Gold plated connectors assure that a perfect and noise free electrical connection is made. 1 m standard length. |
6.2104.600 |
Electrode cable with plug in head U - 2m
Connection cable for new Metrohm electrodes with integrated temperature sensors! Now there is less waste when replacing any Metrohm electrode with the new U connection. Gold plated connectors assure that a perfect and noise free electrical connection is made. 2 meter length for use with sample changers. |
6.2104.610 |
