|
NEW! Polymer Membrane Ca2+ Ion Selective Electrode
Metrohm's newest Ion Selective Electrode is the space saving combination Ca2+ ion selective electrode that is suitable for both direct measurements and titrations. This electrode is housed in a rugged polymer body with membrane that is specially designed to resist physical and chemical damage. This space saving combined sensor also features an reference system utilizing chloride-free electrolyte that is suitable for use when chloride readings are also needed.
|
|
scION Ca2+ Thick Film Ion Selective Electrode
Metrohm's new cutting edge solid state ISE on a chip specifically developed for titrating calcium/magnesium hardness. The scION quickly equilibrates, can never clog and can be stored dry! The exclusive thick-film technology used for the scION electrode allows for easy and affordable replacement of the ISE tip when required. Requires scION shaft 6.1241.070 and separate reference electrode 6.0750.100. Also available in an affordable 3-pack part number 6.0509.007. |
6.0509.000 |
scION Ca2+ Thick Film Ion Selective Electrode - pack of 3
Value pack of 3 x 6.0509.000 scION Ca2+ tips. Requires scION shaft 6.1241.070 and separate reference electrode 6.0750.100. |
6.0509.007 |
scION Electrode Shaft
scION electrode shaft for 6.0509.000 and 6.0509.007 scION Ca2+ tips. |
6.1241.070 |
|
Polymer Membrane Calcium (Ca2+) ISE
This electrode has been discontinued and replaced with the combination electrode 6.0510.100.
|
|
Polymer Membrane Sodium (Na+) ISE
Sodium-selective polymer membrane ion selective electrode for titrations and direct measurement of Na+ ions. Requires separate reference electrode 6.0750.100. |
6.0508.100 |
Ammonium (NH3 and NH4+) ISE
Ammonia and ammonium selective ion selective electrode (ISE) for determination of NH3 and NH4+ ions in aqueous solutions. |
6.0506.100 |
Nitrate (NO3-) ISE with replaceable tip
Nitrate-selective polymer membrane ion selective electrode (ISE) for titrations and direct measurement of NO3- ions. Requires separate reference electrode 6.0750.100. |
6.0504.120 |
Potassium (K+) ISE with replaceable tip
Potassium-selective polymer membrane ion selective electrode (ISE) for titrations and direct measurement of K+ ions. Requires separate reference electrode 6.0750.100. |
6.0504.110 |
Thiocyanate (SCN-) ISE
Thiocyanate (SCN-) ion selective electrode (ISE) for direct determination of SCN- ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.190 |
Silver/Sulfide (Ag/S) ISE
Silver/sulfide (Ag/S) ion selective electrode (ISE) for direct determination of Ag & S ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.180 |
Lead (Pb) ISE
Lead (Pb) ion selective electrode (ISE) for direct determination of Pb ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.170 |
Iodine (I-) ISE
Iodine (I-) ion selective electrode (ISE) for direct determination of I- ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.160 |
Flouride (F-) ISE
Flouride (F-) ion selective electrode (ISE) for direct determination of F- ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.150 |
Copper (Cu) ISE
Copper (Cu) ion selective electrode (ISE) for direct determination of Cu ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.140 |
Cyanide (CN-) ISE
Cyanide (CN-) ion selective electrode (ISE) for direct determination of CN- ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.130 |
Chloride (Cl-) ISE
Chloride (Cl-) ion selective electrode (ISE) for direct determination of Cl- ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.120 |
Cadmium (Cd) ISE
Cadmium (Cd) ion selective electrode (ISE) for direct determination of Cd ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.110 |
Bromide (Br-) ISE
Bromide (Br-) ion selective electrode (ISE) for direct determination of Br- ions in aqueous solutions. Requires separate reference electrode 6.0750.100. |
6.0502.100 |
Sodium (Na+) glass ISE
Sodium (Na+) glass bodied ion selective electrode (ISE) for direct determination of Na+. Requires separate reference electrode 6.0750.100. |
6.0501.100 |
Cationic surfactant electrode
Ion selective electrode (ISE) for the titration of cationic and anionic surfactants in aqueous matrices. This electrode is optimized for exteme sensitivity towards cationic surfactants. Requires separate reference electrode 6.0750.100. |
6.0507.150 |
Surfactrode Refill
Ion selective electrode (ISE) for two phase Epton type titrations of surfactants in the presesnce of practically any solvent other than chloroform. This electrode is optimized for the analysis of soaps and detergents. Requires separate reference electrode 6.0750.100. |
6.0507.140 |
Surfactrode Resist
Ion selective electrode (ISE) for two phase Epton type titrations of surfactants in the presesnce of practically any solvent including chloroform. This maintenance free electrode is suitable for the analysis of surfactants in oils and greases and almost any other matrix. Requires separate reference electrode 6.0750.100. |
6.0507.130 |
Ionic surfactant electrode
Ion selective electrode (ISE) for the titration of cationic and anionic surfactants in aqueous matrices. Requires separate reference electrode 6.0750.100. |
6.0507.120 |
NIO Surfactant Electrode
Ion selective electrode (ISE) for the environmentally friendly titration of non-ionic surfactants in aqueous matrices. Suitable for the tiration of surfactants based on polyoxyethylene adducts and pharmaceutical APIs. Requires separate reference electrode 6.0750.100. |
6.0507.010 |
| Cables and Adapter Plugs |
Standard Electrode Cable - 1m
Standard cable for connecting most Metrohm electrodes to Metrohm instruments. Plug in head "G" with instrument connection "F". 1 meter standard length. |
6.2104.020 |
Standard Electrode Cable - 3m
Standard cable for connecting most Metrohm electrodes to Metrohm instruments. Plug in head "G" with instrument connection "F". 3 meter length for use with sample changers. |
6.2104.040 |
Reference Electrode Cable - 1M
Cable to attach separate reference electrodes to instrument. 1 meter standard length. B (bananna) connection on each end. |
6.2106.020 |
Reference Electrode Cable - 3M
Cable to attach separate reference electrodes to instrument. 3 meter length for sample changers. B (bananna) connection on each end. |
6.2106.050 |
Electrode Cable - Metrohm to Mettler Toledo
Cable for connecting most Metrohm electrodes to Mettler Toledo titrators. Plug in head "G" with instrument connection "LEMO". 1 meter standard length. |
6.2104.160 |
Electrode Cable - Metrohm to Radiometer
Cable for connecting most Metrohm electrodes to Radiometer titrators. Plug in head "G" with instrument connection "RM". 1 meter standard length. |
6.2104.130 |
Electrode Cable - Metrohm to BNC
Cable for connecting most Metrohm electrodes to BNC electrode connections commonly found on ManTech (ManSci), Hanna and Thermo-Orion titrators. Plug in head "G" with instrument connection "BNC". 1 meter standard length. |
6.2104.090 |
Plug adapter - Mettler-Toledo Instrument to Metrohm F Connection
Plug adapter for using any Metrohm cable with standard "F" instrument connection to Mettler-Toledo tirators with LEMO instrument connection. Requires additonal Metrohm instrument cable with F instrument connection. |
020-97-7698 |
Plug adapter - BNC Instrument to Metrohm F Connection
Plug adapter for using any Metrohm cable with standard "F" instrument connection to BNC plug equipped tirators or meters with BNC instrument connection. Includes ManTech (ManSci), Hanna and Thermo-Orion titrators. Requires additonal Metrohm instrument cable with F instrument connection. |
020-97-7591 |
